歡迎訪問濟南科爾超聲波設備有限公司網站！

專注生產工業用超聲波清洗機

讓工業清洗無難事

業務咨詢電話：

18663767799

你所在位置：首頁-新聞動態-常見問題

常見問題

低溫廢水回收設備進行廢水回收工作的流程

作者：admin來源：http://www.eriksarni.com/時間：2023-02-17

目前有越來越多的企業開始關注低溫廢水回收設備的操作。低溫廢水回收設備的出現,為我們帶來了新的可能性。下面來看看低溫廢水回收設備進行廢水回收工作的流程：

At present, more and more enterprises are paying attention to the operation of low-temperature wastewater recovery equipment. The emergence of low-temperature wastewater recovery equipment has brought us new possibilities. Let's take a look at the process of wastewater recovery by low-temperature wastewater recovery equipment:

低溫廢水回收設備非常簡單易操作。只需將廢水管道連接到設備上，打開水龍頭，廢水就會自動進入設備內進行回收。設備內部裝有的廢水處理裝置，能夠有效凈化廢水，使其可以重復利用。

The low-temperature wastewater recovery equipment is very simple and easy to operate. Just connect the waste water pipe to the equipment, turn on the faucet, and the waste water will automatically enter the equipment for recycling. The equipment is equipped with professional wastewater treatment device, which can effectively purify wastewater and make it reusable.

1：進液

1: Liquid inlet

通過外部泵浦將高濃度液進入計量裝置水罐,真空壓力達到時自動閥門開啟吸入釜槽內,完成進液與計量。

The high concentration liquid is pumped into the water tank of the metering device through an external pump. When the vacuum pressure reaches, the automatic valve opens and is sucked into the tank to complete the liquid feeding and metering.

2:加熱

2: Heating

進液完成后打開蒸汽閥門透過夾套對廢液進行加熱,與危廢中的水分行熱交換,為降低含水率提供熱能。

After the liquid inlet is completed, open the steam valve to heat the waste liquid through the jacket, and exchange heat with the water in the hazardous waste to provide heat energy for reducing the water content.
低溫廢水回收設備

3：蒸餾

3: Distillation

直空泵對整體環節抽直空至-80到-90kPa。水分在約45°C即沸騰蒸發低溫狀態可避免其他物質因高溫而二次質變直空環境使水蒸發條件雨有效讓今水率降低雨快。誘過攪拌裝置避免焦結成塊。

The direct-air pump directly empties the whole process to - 80 to - 90kPa. The boiling evaporation of water at about 45 ° C at low temperature can prevent other substances from secondary mass change due to high temperature. The air environment can make the water evaporation condition rain effectively reduce the current water rate and rain quickly. Induce the mixing device to avoid coke agglomeration.

4：排渣

4: Slag removal

加熱過程攪拌均勻受熱,可設定蒸煮周期與批次后,將釜?dú)埻高^攪拌裝置自動排出,完成排出工作。

The heating process is evenly stirred and heated. After the cooking cycle and batch can be set, the kettle residue can be automatically discharged through the mixing device to complete the discharge.

5：排水

5: Drainage

危廢中蒸發的水蒸氣通過冷凝裝置成為干凈的蒸餾回收水,于回收水槽存放,透過泵將回收水依照客戶規劃進行后續使用,。如生產制程回用、回廢水處理廠、生活雜用水使用或加熱過程攪拌均勻受熱,可設定蒸煮周期與批次后,將釜?dú)埻高^攪拌裝置自動排出,完成排出工作。

The water vapor evaporated from the hazardous waste becomes clean distilled and recycled water through the condensing device, which is stored in the recycling tank, and the recycled water is subsequently used through the pump according to the customer's plan,. If the production process is reused, the wastewater treatment plant is reused, the domestic miscellaneous water is used, or the heating process is stirred evenly and heated, the cooking cycle and batch can be set, and the kettle residue can be automatically discharged through the mixing device to complete the discharge.

低溫廢水回收設備有著很多的優勢，它可以有效降低廢水排放量，減少對環境的污染。還能夠節省能源，降低運營成本。此外還具有自動化程度高、運行維護方便等優點，能夠提高工作效率，提高生產率。更多相關內容就來我們網站http://www.eriksarni.com咨詢！

The low-temperature wastewater recovery equipment has many advantages. It can effectively reduce the discharge of wastewater and reduce the pollution to the environment. It can also save energy and reduce operating costs. In addition, it has the advantages of high automation, convenient operation and maintenance, and can improve work efficiency and productivity. Come to our website for more relevant content http://www.eriksarni.com consulting service

上一篇：噴淋清洗機的工藝設計及根據
下一篇：使用CNC高壓清洗機前必要的準備工作