歡迎訪問濟南科爾超聲波設備有限公司網站！

專注生產工業用超聲波清洗機

讓工業清洗無難事

業務咨詢電話：

18663767799

你所在位置：首頁-新聞動態-常見問題

常見問題

操作超聲波清洗機時哪些事項要注意！

作者：admin來源：http://www.eriksarni.com/時間：2023-04-17

1、使用符合設備規格的電源及電源線

1. Use a power supply and power cord that meets the device specifications

根據安全要求需要連接到接地線，清洗劑應放置在清潔、干燥、腐蝕性強的氣體環境中，避免劇烈振動，發電機的后部應留下足夠的散熱空間。以確保超聲波清洗機有良好的接觸，避免發生人身傷害事故。

According to safety requirements, it is necessary to connect to the grounding wire. The cleaning agent should be placed in a clean, dry, and highly corrosive gas environment to avoid severe vibration. Sufficient heat dissipation space should be left at the rear of the generator. To ensure good contact with the ultrasonic cleaning machine and avoid personal injury accidents.

2、嚴禁空載狀態下開機

2. It is strictly prohibited to start the machine in an unloaded state

超聲波清洗機開機前需使用說明的液位將清洗液倒入清洗槽中，被清洗物不得和槽底接觸，建議將工件放入籃筐中清洗。清洗液不得呈強酸或強堿性，無可靠的安全措施時，不能使用易燃溶液。清洗液在一年中的溫度會隨著連續工作時間的延長而增，超聲波清洗機連續工作的時間不應超過規定時間。

Before starting the ultrasonic cleaning machine, it is necessary to use the specified liquid level to pour the cleaning solution into the cleaning tank. The cleaned object must not come into contact with the bottom of the tank. It is recommended to place the workpiece in a basket for cleaning. The cleaning solution should not be strongly acidic or alkaline, and flammable solutions should not be used without reliable safety measures. The temperature of the cleaning solution will increase with the extension of continuous working time within a year, and the continuous working time of the ultrasonic cleaning machine should not exceed the specified time.
噴淋清洗機

3、設備采用不燃性洗凈劑

3. The equipment uses non combustible detergent

由于一些特殊原因需要使用易燃易爆易揮發的溶液作為介質時，會因?yàn)槌暡ㄇ逑礄C(jī)開始工作的時候，超聲波換能器會以每妙震動4萬次的頻率震動，當超聲波換能器以如此高的頻率震動的時候自然會產生大量的熱量，這些熱量通過槽體散發，然后傳到清洗溶液之中，清洗溶液溫度開始提高，然后加速揮發速度，當空氣中的溶液濃度達到一定的值的時候，再碰到因振動而達到一定高溫震子，或者是發熱塊的時候，就是發生燃燒，或者爆炸。

When flammable, explosive and volatile solutions need to be used as the medium for some special reasons, the ultrasonic transducer will vibrate at the frequency of 40000 times per minute when the ultrasonic cleaner starts to work. When the ultrasonic transducer vibrates at such a high frequency, it will naturally generate a lot of heat, which will be emitted through the tank and then transferred to the cleaning solution, and the temperature of the cleaning solution will start to rise, Then accelerate the volatilization rate. When the concentration of the solution in the air reaches a certain value, and when it encounters a high-temperature oscillator or heating block caused by vibration, combustion or explosion occurs.

此外提醒超聲波清洗機的操作人員一定要穿著防靜電工作服，這樣可以達到一個防護的作用，讓我們可以安全，安心的去工作。在操作超聲波清洗機一定要按照正確步驟進行，這樣才能確保在高性能的超聲波清洗機的車間避免事故的產生。

In addition, it is reminded that the operators of the ultrasonic cleaning machine must wear anti-static work clothes, which can achieve a protective effect and allow us to work safely and with peace of mind. When operating an ultrasonic cleaning machine, it is necessary to follow the correct steps to ensure that accidents are avoided in the workshop of high-performance ultrasonic cleaning machines.

上一篇：高壓清洗機清洗過程中需注意的參數
下一篇：應用多槽超聲波清洗機的優勢！