歡迎訪問濟南科爾超聲波設備有限公司網站！

專注生產工業用超聲波清洗機

讓工業清洗無難事

業務咨詢電話：

18663767799

你所在位置：首頁-新聞動態-新聞資訊

新聞資訊

全自動超聲波清洗機的除油過程

作者：admin來源：http://www.eriksarni.com/時間：2023-02-14

我們都知道全自動超聲波清洗機的功能多樣化，對于不同的產品也有不同的清除污漬的辦法，下面小編為大家講解的是全自動超聲波清洗機的除油過程。

We all know that the functions of the automatic ultrasonic cleaning machine are diverse, and there are different ways to remove stains for different products. The following editor will explain the oil removal process of the automatic ultrasonic cleaning machine.

全自動全自動超聲波清洗機具有多種清洗功能，清洗機可以根據不同的工藝，經過同一清洗流程，將不同的油品、繡品、粉塵等贓物清洗干凈。在選擇不同超聲波清洗液時，一定要注意清洗溫度的掌控，溫度通?？刂圃谒奈迨燃纯?。

Full-automatic and full-automatic ultrasonic cleaning machine has various cleaning functions. The cleaning machine can clean different oil products, embroideries, dust and other dirty goods through the same cleaning process according to different processes. When selecting different ultrasonic cleaning fluids, pay attention to the control of cleaning temperature, which is usually controlled at 40 or 50 degrees.

全自動全自動超聲波清洗機通過對設備進行循環系統的增加，將清洗過程的產品進行過濾后反復使用，從而達到節能的目的。對清洗過程的水資源、清洗溶劑等過濾后進行重復使用，從而達到環保目的，大大提高了研發人員的綜合形象特點。

Full-automatic ultrasonic cleaning machine can filter and reuse the products in the cleaning process by increasing the circulation system of the equipment, so as to achieve the purpose of energy saving. The water resources and cleaning solvents in the cleaning process are filtered and reused to achieve the purpose of environmental protection and greatly improve the comprehensive image characteristics of the R&D personnel.

全自動超聲波清洗機通過自身的功能，減少了各種污染、清洗過程中給人們帶來的危害，利用設備的現代化，大大減少的使用過程中產生的人力、物力的成本，同時也減少了人們的清洗等待時間。

Through its own functions, the fully automatic ultrasonic cleaning machine reduces all kinds of pollution and the harm brought to people in the process of cleaning. The modernization of the equipment greatly reduces the cost of human and material resources generated in the process of use, and also reduces people's waiting time for cleaning.

1、放入槽中

1. Put into the slot

因?yàn)榍逑吹氖怯臀郛a(chǎn)品，所以要把有油污的這些產品，例如鋁塊、軸承、鏈條等統一放入到清洗的籃子中，然后放入清洗的槽中。

Because the products to be cleaned are oil contaminated products, these products with oil contamination, such as aluminum blocks, bearings, chains, etc., should be put into the cleaning basket, and then put into the cleaning tank.
全自動超聲波清洗機

2、加除油劑

2. Add degreasing agent

在清洗槽中加水，然后放入適合清洗產品的除油劑。記住一定要適量，不能過量，否則會影響清洗效果。

Add water into the cleaning tank, and then put in the degreaser suitable for cleaning products. Remember to use proper amount, not excessive amount, otherwise the cleaning effect will be affected.

3、打開電源

3. Turn on the power

要將全自動超聲波清洗機的電源打開，這樣機器便可以正式工作了。等到清洗一段時間之后，再放入到烘干槽中進行烘干的步驟，然后就完成了。

Turn on the power of the automatic ultrasonic cleaning machine, so that the machine can work formally. After cleaning for a period of time, put it into the drying tank for drying, and then it is finished.

全自動超聲波清洗機的除油過程大概就如此了，除油的效果是非常好的，那么，如果有需求的話，不妨可以來我們網站http://www.eriksarni.com進行咨詢！

This is probably the oil removal process of the automatic ultrasonic cleaning machine. The oil removal effect is very good. If you need it, you can come to our website http://www.eriksarni.com Consult!

上一篇：使用超聲波清洗機時的4大錯誤注意防范！
下一篇：如何讓多槽手動超聲波清洗機洗的更干凈？