歡迎訪問濟南科爾超聲波設備有限公司網站！

專注生產工業用超聲波清洗機

讓工業清洗無難事

業務咨詢電話：

18663767799

你所在位置：首頁-新聞動態-新聞資訊

新聞資訊

全自動超聲波清洗機生產制作標準

作者：admin來源：http://www.eriksarni.com/時間：2023-10-27

全自動超聲波清洗機的生產制作標準包括以下步驟：

The production standards for fully automatic ultrasonic cleaning machines include the following steps:

明確超聲波清洗機的設計要求：超聲波清洗機應能滿足清洗對象的工藝要求，包括清洗時間、清洗溫度、清洗介質等。同時，要按照科學、合理、節能的原則進行設計，并符合相關的法規和標準要求，保證產品的安全性、可靠性和有效性。

Clarify the design requirements of the ultrasonic cleaning machine: The ultrasonic cleaning machine should be able to meet the process requirements of the cleaning object, including cleaning time, cleaning temperature, cleaning medium, etc. At the same time, it is necessary to design according to the principles of science, rationality, and energy conservation, and comply with relevant regulations and standards to ensure the safety, reliability, and effectiveness of the product.

確定超聲波清洗機的設計參數：根據清洗對象的要求，確定相應的設計參數，包括清洗槽的尺寸、超聲波功率、清洗介質的種類和流量等。

Determine the design parameters of the ultrasonic cleaning machine: Based on the requirements of the cleaning object, determine the corresponding design parameters, including the size of the cleaning tank, ultrasonic power, type of cleaning medium, and flow rate.
全自動超聲波清洗機

編制超聲波清洗工藝：根據客戶對產品的清潔度和生產規模的要求，以及下一道工序加工的需要，編制主工序的清洗工藝。例如，在電鍍前必須進行除油清洗，否則會影響鍍層的結合力；又如，在金屬件、塑料件表面噴漆前一定要進行清洗，去除油污，以保證涂層的結合力。

Develop ultrasonic cleaning process: Based on the customer's requirements for product cleanliness and production scale, as well as the needs of the next processing step, develop the cleaning process for the main process. For example, oil removal and cleaning must be carried out before electroplating, otherwise it will affect the adhesion of the coating; For example, before painting the surface of metal and plastic parts, it is necessary to clean and remove oil stains to ensure the adhesion of the coating.

設備調試和檢驗：完成清洗工藝后，要對設備進行調試和檢驗，確保設備符合設計要求和工藝規范。

Equipment debugging and inspection: After completing the cleaning process, the equipment needs to be debugged and inspected to ensure that it meets the design requirements and process specifications.

包裝和運輸：對清洗完成的物品進行包裝，并選擇合適的運輸方式將物品安全地送達目的地。

Packaging and transportation: Package the cleaned items and choose an appropriate transportation method to safely deliver them to their destination.

以上是全自動超聲波清洗機的生產制作標準的大致步驟，具體細節可能因設備類型和使用場景的不同而有所差異。

The above are the general steps for the production and production standards of fully automatic ultrasonic cleaning machines, and the specific details may vary depending on the type of equipment and usage scenarios.

上一篇：噴淋清洗機的選擇要注意什么？
下一篇：超聲波清洗機打開后會出現響是怎么回事？